YSM flame retardant reflective tape factory can not only provide excellent reflective performance for safety clothing, but also ensure long-term durability in various extreme environments. YSM will continue to be committed to innovation and quality improvement to provide customers with the best reflective material solutions.

Production process of YSM flame retardant reflective tape

YSM flame retardant reflective tape is an innovative product that combines high-efficiency reflective materials with flame retardant technology. It is widely used in safety clothing, fire clothing, industrial protective clothing and other occasions that require high visibility and protective performance. Its production process is complex and delicate, ensuring that the product has excellent durability and reliability while meeting strict safety standards.

Substrate selection

The substrate of YSM flame retardant reflective tape is mainly 100% cotton or 100% aramid. Both materials have excellent flame retardant properties. Among them, 100% aramid material has higher heat resistance and strength, which is very suitable for use in extreme environments. The choice of substrate directly affects the final performance of the product. Therefore, we strictly control the quality of the material during the production process to ensure that it meets international certification standards such as EN20471 Class II, ANSI/ISEA107-2020, Oeko Tex 100 and NFPA 2112.

Reflective layer coating process

The reflective layer is the core part of the flame retardant reflective tape, using high-performance glass microbeads or microprism technology. These reflective particles are evenly attached to the substrate through a precise coating process to form a layer of high reflectivity coating, ensuring excellent reflective effect in low light conditions. YSM uses advanced coating equipment and technology to ensure the uniformity and stability of the reflective layer, and the reflectivity reaches more than 500cd/lx·m².

Flame retardant treatment and finishing

After the reflective layer is coated, the tape will be flame retardant treated to ensure that it will not support combustion under high temperature and open flame conditions. YSM's flame retardant treatment technology has passed the strict ISO 6330, ISO 3175 and ISO 15797 water washing performance tests, ensuring that the tape maintains excellent flame retardant and reflective properties after long-term use and multiple washings.

Cutting and forming

After multiple processes, the tape is precisely cut into the specifications required by the customer. YSM's production equipment is equipped with advanced automated cutting technology, which can customize tapes of different widths, lengths and shapes according to customer needs to ensure the applicability and convenience of the product.

Sewing Guide for YSM Flame Retardant Reflective Tape on Safety Clothing

In order to ensure the best performance of YSM Flame Retardant Reflective Tape on safety clothing, the correct sewing process is essential. The following is a sewing guide recommended by YSM to help customers get the best results during the production process.

Needle and thread selection

When sewing YSM fire retardant reflective tape, it is recommended to use high-temperature resistant aramid or polyester thread. These threads not only have good abrasion resistance and strength, but also can remain stable in high temperature environments and are not easy to melt or break.

Needle Length and Sewing Density

A needle length of 8-10 needles per inch is recommended to ensure that the tape is firmly attached to the garment. Too large a needle length may result in insufficient adhesion between the tape and the substrate, while too small a needle length may affect the reflective effect.

Sewing Equipment Adjustment

During the sewing process, the tension and presser foot pressure of the sewing machine should be moderate to avoid damage to the surface of the tape. Too high a presser foot pressure may cause damage to the reflective layer on the surface of the tape, while too low a presser foot pressure may result in loose sewing.

Sewing Position and Process

When designing clothing, the position of the YSM flame retardant reflective tape should be arranged reasonably to ensure that it maximizes the wearer's visibility. It is recommended to sew reflective tape on the shoulders, cuffs, chest and back of the garment to form a complete 360-degree reflective effect.

Heat Treatment and Setting

After sewing, the tape can be set by appropriate heat treatment to improve its adhesion and appearance neatness. Care should be taken to control the temperature and time to avoid damage to the tape substrate or reflective layer due to excessive temperature.